Lighting Fixtures

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

15 ea. 6” Fresnels, Altman Model 65Q.  Lamped at 500 watt

4 ea. 3” Fresnels, Altman Model 100.  Lamped at 150 watt

7 ea. Altman 360Q 6x9's.   Lamped with HX601's

6 ea. Altman 360Q 6 x 12's.   Lamped with FEL's or HX601's (mixed)

11 ea. Altman 360Q 6x16's.   Lamped with HX601's or  FEL

10 ea. Altman 360Q 6x22's.   Lamped with FEL or HX601's

10 ea. Berkey-Colortran 30 degree fixtures (lens adjustable for 20,30 and 40 degree field angle) lamped FEL or HX601

6 ea. Lee/Colortran Mini Ellipse (30,40,50 degree field angle) 500 watt

6 ea. 3 1/2 x 6” ER’s, Altman Lamped.  with HX 601’s

20 ea. PAR 64.  Various 1K lamps. CONFIRM AVAILABILITY

14 ea. PAR 56.  Various 500 watt lamps, CONFIRM AVAILABILITY

10 ea. Christronix Floods (used for house and work lights) 500 watt lamps, remote controlled via X10 control system controllers *

6 ea. PAR 46/38 fixtures

4 ea. "PIN" spots

3 ea. Penn Fabrication single cell CYC lights (lamped at 500 watt)

2 ea. 4 cell mini CYC light (lamped at 500 watt)

1 ea. Colortran Video “Softlight” (lamped at 1 kW)

2 ea. 48" single tube Ultraviolet units (black Lights)

misc. accessories for above equipment, i.e.. pattern holders, donuts, top hats.  CONFIRM AVALIBLITY

* - The remote control of these fixtures is via the X10 or Radio Shack Power House lighting control system. Dimmers are mounted in each fixture and controlled by a carrier current signal that flows on the power line connected to the fixture. The lights can be turned off and on as well as dimmed down and up at a predetermined rate.

Lighting Controllers

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

1 ea. ETC Insight 72 channel controller

1 ea. NSI MC 7008 (8 fader) NSI Microplex channels 1-8 ONLY

2 ea. NSI 7216 (16 fader) NSI Microplex and or DMX 512 assignable over 128 channel range.

Dimmers (64 max system total)   

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

A Rack System

8 Channels. Skirpan 'Astral 2' - 2 kW "high spec" dimmers. ULTRA Quiet. Suitable for Video and Film applications.

8 Channels ETA model 1254.  2 ea. 4 x 2 kW dimmers (8 channels).

40 Channels. NSI NRD 8000 dimmer pack.  1.2 kW per channel

(48)

* Rack is driven with DMX-512.  De-multiplexers provide control for analog dimmers located in dimmer rack.  

B Rack System

24 Channels. 1.2 kW channels ETA NSI Microplex control.

Utility Hand Dimmers

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

1 ea. Christronix Model DLL 501 hand dimmers. 500 watt toggle dimmer.

Unit is assembled in a 4"x4" steel junction box with duplex Edison socket. Equipped with a 6' power cord.

Remote Control Utility Dimmers

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

4 ea. Christronix Model 50001 dimmer. 500 watt remote control.

Unit is comprised of an X10 dimmer with a duplex Edison socket in a weather proof junction box. Equipped with a 6' power cord. This unit is controlled with a standard X10 or Radio Shack Power House control unit. See description in lighting fixture section above.

Multi-core lighting and power cables

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

1 ea. 155’ 8 channel 16 AWG  w/32" attached pig tails (1 KW per channel MAX)

1 ea. 148’ 8 channel 16 AWG  w/32" attached pig tails (1 KW per channel MAX)

1 ea. 135’ 8 channel 16 AWG  w/32" attached pig tails (1 KW per channel MAX)

1 ea. 130’ 8 channel 16 AWG  w/32" attached pig tails (1 KW per channel MAX)

1 ea.  80’ 8 channel 16 AWG  w/32" attached pig tails (1 KW per channel MAX)

1 ea. 48’ 8 channel 16 AWG  w/32" attached pig tails (1 KW per channel MAX)

1 ea.  50’ 4 channel 14 AWG  w/24" attached pig tails (1.5 KW per channel MAX)

1 ea. 100’ 4 channel 14 AWG  w/24" attached pig tails (1.5 KW per channel MAX)

2 ea. 150’ 2 circuit 12 AWG with twist lock (dual 20A 125/250 VAC)

2 ea. 100’ 2 circuit 12 AWG with twist lock (dual 20A 125/250 VAC)

4 ea. 100' 2 circuit 10 AWG with twist lock (dual 30A 125/250 VAC)

Extension Cables

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

(stingers) Standard Edison three wire cables w/U ground.

14 AWG

18 ea.  8’ black

18 ea. 15’ black

 2 ea.  25’ blue

 2 ea.  25' black

 6 ea.  35’ black

 4 ea.  50’ black

 4 ea. 100’ black

ORANGE 16 AWG

4 ea. 100'

1 ea. 50’

1 ea. 25’

ORANGE 12 AWG

4 ea. 100’

Adapters, effects, lighting accessories etc.

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

18 ea. 4 way 7 1/2" barn doors for 6” fixture and PAR 56 can

2 ea. 7.5"   "Top Hats" or "Snoots", as you like

2 ea. 4 way 10" barn doors for 8” fixture and PAR 64 can

6 ea. 4" color media frames (3 1/2" Altman ER)

32 ea. 7 1/2" color media frames (6" fixtures and PAR 56 cans)

26 ea. 10" color media frames (8" fixtures and PAR 64 cans)

10 ea. 7 1/2" "Donuts" used on 6" ER's

 2 ea. 10" "Donuts"  Used on 8" ER's

 6 ea. pattern holders for Altman 3 1/2" Q ER

10 ea. pattern holders for Altman 360Q  ER

6 ea. 3 3/4" color media frames (3" Altman Fresnels)

Electrical:

Various stage pin to Edison, both sexes. Includes male SPG to duplex Edison

Assorted Edison taps and plug strips

5 ea. 20 amp 125/250 VAC 2 circuit twist lock to Edison Quad Box. adapter

4 ea. 30 amp 125/250 VAC 2 circuit twist lock to Edison Quad box. adapter

Effects:

1 ea. American DJ - “Fog Hog” fog machine

2 ea. American DJ Volcano Haze Generator

2 ea. MBT FM9000 high output Foggers

1 ea. mirror ball, 12”  (various motors).

1 ea. 6 head "Helicopter"

Steel, lighting stands and hardware

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

6 ea. STL 66 lb. 1 1/2” pipe bases

4 ea. 50 lb Christronix Custom “gusset” bases (2'x2' square). Can be fitted with swivel 1 1/2” key clamp, or fined pipe adapter.

4 ea. 50 lb Christronix Custom "TRUSS" bases (2'x2' square) made to work with ROHN Truss listed below.

2 ea. 30 lb. cast base stands (9 1/2’ telescoping)

4 ea. 15' crank up stands.

Assorted 1 1/2” steel pipe:

4 ea.   21'
4 ea.   15'
6 ea.   10'
1 ea.     8'
3 ea.     5'

4 ea. Swivel Cheesboro 1 1/2" pipe

10 ea. "Roto-Locks" or "Grid Clamp"  1 1/2" pipe 90 degree clamp

Assorted 1 1/2” key clamp parts: single swivels, 45 degree swivels, couplers, etc.

Lighting / structural Truss - Rohn steel triangle 12"

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

4 ea. 7’ sections

18 ea. 10'’ sections

4 ea. Rohn 90 degree corner sections

Steel plate bases to use this truss in a vertical configuration listed in the section above.

 Lighting Power and Utility Power Distribution 

PLEASE NOTE: Actual quantities of equipment and availability MUST be CONFIRMED prior to releasing any design documentation based on equipment listed in this inventory

This equipment is currently under revision. The minimum connectorization is listed below in the description.

-Dimmer rack: Main Power distribution built into custom rack.  Additional utility power and satellite dimmer pack power.

-Main distro: Heavy Duty 200 amp Three Phase Power distribution system in a vertical rolling road case:

44 position Square D panel with Square D high voltage fused safety disconnect switch

A variety of connections:

4 ea. dual circuit 30 amp twist lock

5 ea. dual circuit 20 amp twist lock

3 ea. 20 amp Duplex Edison quad boxes with 1 side plain and one side GFI protected connections

1 ea. 20 amp Duplex Edison quad box.

1 ea. 20 amp 125 VAC twist lock connection